Alamo Schwarze SUPERVA C SUPER UPDRAFT, Руководство по эксплуатации продукта

Страница: 63 / 79

Section 4 - Service
64
SCHWARZE SUPER UPDRAFT
revised 04/19
MAINTENANCE
3. Note that most of the bolts face toward the back of the truck. Also take not of which bolts face different
directions.
4. To prevent confusion, remove, mark and replace only one flap at a time, taking note of which side of the
metal strips the flap is on.
5. Fasten the flaps with 1/4” x 1” bolts and nylock nuts. Install 1/4” washers anywhere the flap meets a nut or
bolt.
6. Reinstall rubber skid spacers making sure there are four on each side.
7. Reinstall head making sure that all chains are at the proper length and the springs are set to the proper
tension.
91” Pick-up Head 81” Pick-up Head
Thin Flap 91” X 9”
1/8” SBR 81” X 9”
1/8” SBR
Front Flap 8” X 72”
1/8” X 1/16” 3-Ply Belting
6” X 86” 8” X 62”
1/8” X 1/16” 3-Ply Belting
6” X 76”
Center Flap 1/8” X 1/16” 3-Ply Belting 1/8” X 1/16” 3-Ply Belting
Rear Flap
(Both 12” and 10” Flaps
are cut from this flap) 7” X 136”
1/8” X 1/16” 3-Ply Belting 7” X 126”
1/8” X 1/16” 3-Ply Belting