ALADIN ALADIN AIR Z, Руководство по эксплуатации, Страница: 43 / 86

43
III Uwatec ® Aladin ® Air Z
III 4 Functions during the Dive
4.5 Decompression information
No-stop time is displayed if no decompression stops are necessary. The arrow <NO STOP> is visible if no
decompression stops are necessary. The figures indicate no-stop time in minutes..
– No-stop display <99:> means remaining time of 99 minutes or
more.
– No-stop time is calculated assuming normal workload and current
water temperature.
Messages: There is an acoustic alarm, if no-stop
time is less than 1 minute. In this last minute, the
no-stop display shows the flashing value <0>.
Response: In order to prevent a decompression dive, you must ascend a few
feet after this message.
It is dangerous and an unsafe diving practice to
"push" the Aladin
®
Air Z or any other decompres-
sion tool to its limits. Avoid no-stop times of less
than three minutes at any given depth.
Decompression values On entering the decompression phase, the arrow <NO STOP> disappears. The
arrow <DECOSTOP> appears. Right beside the arrow, the deepest decompres-
sion stage in feet is displayed. Beside the decompression depth, the decom-
pression time of the displayed stage in minutes appears. The display <30ft 3:>
means that a decompression stop of 3 minutes at a depth of 30 ft has to be
made.
When a decompression stop has been finished, the next higher decompression
stop is displayed. When all decompression stops have been made, the arrow
<DECOSTOP> extinguishes and the arrow <NO STOP> reappears. The indicati-
on of time on the lower right shows the no-stop time again.
NO STOP
depth dive time
max. depth deco info
NO STOP
depth dive time
max. depth deco info
depth dive time
max. depth deco info
DECOSTOP
ft
WARNING
WARNING