ALADIN ALADIN AIR Z, Руководство по эксплуатации, Страница: 32 / 86

32
4 Setting Up (Transmitter and Dive Computer)
II Uwatec ® Aladin ® Air Z
3.Open the tank valve. The transmitter briefly sends a pairing sequence to the
computer.
4.The dive computer shows a flashing <PAIr> in the display-position of tank pres-
sure shortly after the valve has been opened.
5.In order to confirm the pairing, the B- and E-contacts have to be bridged within
5 sec. A bleep confirms the input and the <PAIr>-display remains still.
6.Tank pressure is displayed after approximately 10 seconds.
7.In case of faulty pairing, the display <FAIL> appears instead of <PAIr>. In that
case, completely purge the regulator and repeat the pairing procedure. This is
only possible after at least 15 seconds.
– Pairing of transmitter and dive computer remains valid until a new pairing pro-
cedure is carried out. Pairing of transmitter and dive computer can therefore be
carried out at home and must only be executed once, before the first use. A
new pairing procedure is always necessary when a new transmitter or a new
dive computer is used and after changing the battery.
– Tank pressure shown in the lower part of the display of the dive computer
should be checked prior to every dive.
tank data
tank data
tank data
psi
10 s
tank data