ALADIN ALADIN AIR Z, Руководство по эксплуатации, Страница: 38 / 86

38
2 Attention Messages and Alarms / 3 Preparation for the Dive
III Uwatec ® Aladin ® Air Z
2.3 Alarm low battery
Computer battery low:
In dive-mode, <bAt> is indicated by flashing display
and alternating with the display of maximum depth,
as soon as battery capacity is 0%.
In ready-mode and surface-mode, <bAt> is shown
instead of maximum depth. Have the batteries chan-
ged by your retailer!
Transmitter battery low:
<bAt> flashing and alternating with the display of
the tank pressure. Have the batteries changed by
your retailer!
3 Preparation for the Dive
The following description of the preparation of a dive is based on the assumption that the transmitter is
mounted correctly at the HP-outlet of the regulator (see pages 29, 30) and that it is paired with Aladin
®
Air Z (see page 31).
If the Aladin
®
Air Z transmitter is not correctly
mounted or is not correctly paired, it will not per-
form properly and serious injury or death may
result.
1. Mount regulator with transmitter on tank.
2.Check the reserve valve of your tank, the reserve valve must be open.
If a reserve or “J“-type valve is used, the valve
must be in the open (down) position for the
Aladin
®
Air Z to work correctly.
3.Switching on Aladin ® Air Z manually: Bridge contacts B and E with moistened
fingers. Check test display: are all displays lit?
4. Open valve (transmitter switches on automatically).
depth dive time
max. depth deco info
depth dive time
max. depth deco info
NO STOP NO STOP
tank data
tank data
psi
h
h
m
ft
NO STOP
DO NOT FLY
DESATURATION
S
L
O
W
DIVEPLAN
LOGBOOK
DIVE
SPEED
%
depth dive time
max. depth deco info
DECOSTOP
tank data
psi
bar
WARNING
WARNING