ALADIN ALADIN AIR Z, Руководство по эксплуатации, Страница: 26 / 86

26
3 Dive Computer
II Uwatec ® Aladin ® Air Z
Dive-mode:
Activation: automatically at depth of about 2 ft.
In dive-mode, all diving functions are monitored, i.e.
depth and dive time displayed, maximum depth sto-
red, saturation of tissues calculated depending on
workload and temperature, no-stop time or decom-
pression prognosis determined, ascent rate control-
led and displayed and the correctness of the decom-
pression procedure supervised.
Wait-mode:
Activation: automatically on reaching the surface
The wait-mode is activated if the the diver surfaces (diving depth less than 2 ft).
At the surface, the dive is not completed and entered into the logbook for an
interval of 5 minutes. This allows a short surfacing for the purpose of orienta-
tion.
Surface-mode:
Activation: automatically after a dive or when changing altitude.
After a dive has been completed, Aladin
®
Air Z is in surface-mode. All data
belonging to the surface interval are calculated and displayed: simulation of
microbubble formation, actualization of the saturation of tissues depending on
the calculated skin temperature and the assumed work load at the surface, cal-
culation of desaturation time and no fly interval.
In order to save energy, Aladin
®
Air Z falls into the “surface-sleep” after 3
NO STOP
depth dive time
max. depth deco info
tank data
psi
ft
depth dive time
max. depth deco info
DECOSTOP
tank data
psi
depth dive time
max. depth deco info
tank data
psi
h
h
DO NOT FLY
DESATURATION
depth dive time
max. depth deco info