ALADIN ALADIN AIR Z, Руководство по эксплуатации, Страница: 25 / 86

25
3 Dive Computer
II Uwatec ® Aladin ® Air Z
II
3.2 Operating modes Aladin ® Air Z works in various operating modes:
Sleep-mode:
Activation: automatically
When Aladin
® Air Z is not used it is in the so called sleep-mode.
In this case, the electronics are “sleeping“ for the most part, the display does
not show any information. The computer is briefly activated once every minute
to measure atmospheric pressure. The display remains switched off. If a change
in altitude is recognized, Aladin
®
Air Z switches to —> surface-mode for
3 minutes.
Ready-mode:
Activation: By touching contacts B and E from sleep-mode.
To check the display, all signs light up for 5 seconds.
Aladin
®
Air Z switches into ready-mode afterwards. Once in ready-mode, the
display is switched on and altitude sections are eventually displayed. If the
appertaining transmitter is switched on and located within transmitting
distance, the tank-pressure is displayed, otherwise <—> will be displayed.
By touching contacts B and E in the ready-mode once more, Aladin
®
Air Z will
display the remaining battery capacity by percentage. Three minutes after
activating the ready-mode, Aladin
®
Air Z will fall back into the -> sleep-mode.
depth dive time
max. depth deco info
h
h
m
ft
NO STOP
DO NOT FLY
DESATURATION
S
L
O
W
DIVEPLAN
LOGBOOK
DIVE
SPEED
%
depth dive time
max. depth deco info
DECOSTOP
tank data
psi
bar
depth dive time
max. depth deco info
tank data
psi
tank data
with transmitter without transmitter