ALADIN ALADIN AIR Z O2 Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 104

ALADIN ALADIN AIR Z O2 Скачать руководство пользователя страница 74

74

1 Diving at Reduced Risk with Aladin

®

Air Z O

2

IV Uwatec

®

Aladin

®

Air Z O

2

1.1 Diving at reduced risk

Aladin

®

Air Z O

2

recognizes and reacts “intelligently“ to certain risk situations, although of course it is

much better that each individual diver avoid these higher risk situations altogether. If a decompression
accident does occur, the optional MemoMouse and DataTrak software allows the analysis of the dive
profile and certain risk parameters to provide for more complete information for treatment purposes.
Analysis of the most recent results of decompression research and statistical analysis of diving accidents
involving decompression sickness supports the following guidelines for diving with a reduced risk of
decompression sickness.
The following suggestions are highly recommended:

Neither the Aladin

®

Air Z O

2

nor any other diving computer or decompression

table can guarantee that decompression sickness will not occur even if the
computer or table is used correctly and all of the following precautions are
followed.

1.2 Diving at reduced risk for the first dive

The following are highly recommended suggestions to prevent risky situation during the first dive:
– Always make your first dive the deepest dive of the day.
– Always make the deepest descent of each given dive on a particular day at the beginning of that dive.
– Avoid repeated ascents and descents (yo-yo diving).
– Plan the dives shorter if they are made in cold water.
– Avoid repeated heavy workload whilst at depth.
– Ensure that you have enough Gas for the Ascent. Do not use the RBT to the limit if prolonged ascents

or an increased rate of breathing (currents…) are expected.

– If the ascent is made in a current, do not use up the RBT to the end.
– Plan the dives shorter if they are made in cold water.
– After finishing the decompression or at the end of a no-stop dive, the final stage of the ascent should

be as slow as possible.

– On all dives with the Aladin

®

Air Z O

2

, make a safety stop for at least one to three minutes within the 3

to 5 metre zone.

– Check <O

2

% MIX> (gas mixture) and the dive depth limit given by the maximum ppO

2

selected.

«
...
72
73
74
75
76
...
»

Содержание ALADIN AIR Z O2









































































































Отзывы:

Нет отзывов