manualshive.com logo in svg

ALADIN ALADIN AIR Z O2, Руководство по эксплуатации, Страница: 39 / 104

Поделиться
Скачать
ALADIN ALADIN AIR Z O2 Скачать руководство пользователя страница 39

39

4 Setting Up (Oxy2, Pressure transmitter and Dive Computer)

II Uwatec

®

Aladin

®

Air Z O

2

English

II

Oxy2 and dive computer must be in physical contact during all the pairing 
procedure.

3. Bridge the Oxy2 contacts E and B  (switching on, sensor capacity check).

4. The dive computer shows after a short time a flashing <PAIr> in the lower

display.

5. In order to confirm the pairing, the B- and E-contacts have to be bridged within

5 sec. A bleep confirms the input and the <PAIr>-display still remains. The
computer and Oxy2 must remain in physical contact until the confirmation has
been done.

6. Oxygen data is displayed after approximately 10 seconds.

7. In case of faulty pairing, the display <FAIL> appears instead of <PAIr>. In that

case, the pairing procedure has to be repeated.

tank data

tank data

tank data

bar

%

tank data

10 sec

Содержание ALADIN AIR Z O2









































































































Отзывы:

Нет отзывов