AL-MEISTER ALM3222 Instruction Manual <Rev.2>
Page
38
of
52
5. AUTOMATIC OPERATION (cont’d)
5-2-8. PAPER FEED ADJUST
PAPER FEED ADJUST
is a setting that adjusts the aggressiveness of the feeding section.
1. Press MODE and use the cursor buttons to
select PAPER FEED ADJUST. Press MODE again.
2. Select the setting by again moving the cursor. The range is +10 to -10.
HINT:
A more positive value runs the feeder a longer amount of time. Use a more positive value in cases
where paper does not reach the film in time (and “Feeding” errors or “Lamination” errors result).
A more negative value is appropriate if jamming of paper occurs at the film (“Paper Jam” errors or
certain lamination defects).
