AL-KO MS 2600, Инструкция по эксплуатации

Страница: 24 / 304

Translation of the original operating instructions 24
Engine starts
but does not run
with full perform-
ance
„
Set the lever to RUN.
„
Clean or exchange the filter.
Motor runs
spasmodically
„
Clean / adjust or replace the
spark plug.
Excessive
smoke
„
Use the correct fuel mixture.
Faults that cannot be corrected with the help of this table
must be rectified in an authorized, specialist workshop.
Disposal
Machines that are no longer
required must not be disposed
of with household waste!
Packaging, machine and accessories are manufac-
tured using recyclable materials and must be disposed
of accordingly.
5. Pour a teaspoon of 2-stroke oil into the combustion
chamber. Pull the starter cord slowly several times to
distribute the oil in the interior of the engine.
6. Insert the spark plug again.
7. Thoroughly clean and service the device.
8. Store the device in a cool dry place.
Caution!
Do not store the machine in the vicinity of naked flames
or heat sources – Risk of fire and/or explosion!
Caution! Fire hazard!
Do not store fuelled machine in buildings where the
petrol fumes might come into contact with naked flames
or sparks!
Keep the area around the engine, exhaust, battery case
and fuel tank clear of grass cuttings, petrol and oil.
Recommissioning
1. Remove the spark plug.
2. Quickly pull the starter cord to remove leftover oil from
the combustion chamber.
3. Clean the spark plug, check the electrode distance.
4. Re-install the spark plug, replace if necessary.
5. Prepare the device for operation.
6. Fill the tank with the correct fuel/oil mixture .
Troubleshooting
Problem Correction
Engine does not
start
„
Incorrect starting procedure,
observe the operating instruc-
tions.
„
Clean the spark plug and the
air and fuel filters.
Engine starts
but does not
continue to run
„
Set the lever to RUN.
„
Clean / adjust or replace the
spark plug.
„
Clean or exchange the filter.