Subject to changes in line with technical progress.
45
3059570
Assembly
5.6.10
Control connection (option)
Connect the supplied supply air sensor to the switch cabinet.
Connect the supplied outdoor air sensor to the switch cabinet.
Connect the supplied external air sensor to the switch cabinet.
With the "Room temperature control" option, connect the supplied room sensor to the switch cabinet.
Connect the attached damper adjusting actuators to the switch cabinet.
With WWE units, connect the frost protection thermostat to the switch cabinet.
With filter units, connect the load cells to the filter monitoring on the switch cabinet.
Connect the corresponding valves and pumps to the switch cabinet.
Connect the supply voltage and the control cable for the supply and exhaust air fans to the switch cabinet and to
the supplied plugs in accordance with the circuit diagram. Then connect the plugs to the sockets integrated into the
fan unit.
With the room unit, connect the room unit to the switch cabinet. With an additional room unit, this must be plugged
into the control, socket J10, using RJ-12 connectors.
Connect the supply line in accordance with the circuit diagram.
