Subject to changes in line with technical progress.
27
3059570
Assembly
5.5
Assembly of the modules
5.5.1
Work steps
1
2
3
Fig. 12 Fit click connectors and covering caps
1
Click connectors
3
Special tool for disassembly
2
Covering cap
1
3
2
Fig. 13
Affix sealing tape
1
Sealing tape
3
Intermediate rib
2
Click connectors
Step
Action
1
Unpack modules.
2
Fit the provided click connectors (2) into the intended opening on the front of the module.
3
Always affix the enclosed sealing tape (1) flush to the unit inside edge past the click connector (2) to the end face of the
modules and additionally to the intermediate rib (3) on the outer edge. It is important to ensure that the sealing tape (1)
is not attached under tension (especially at the corners).
4
Attach the supplied coverings caps to the inside of the housing. The inspection openings for the click connectors (2)
are thus closed.
