Subject to changes in line with technical progress.
51
3059570
Servicing and maintenance
8
Servicing and maintenance
8.1
Safety instructions for servicing and maintenance
WARNING
Risk of injuries.
Before all repair and maintenance work, disconnect the EASYAIR
®
flat unit from the mains
on all poles and secure to prevent restart.
Follow the applicable safety rules.
Have installation, commissioning, servicing and maintenance work carried out only by
qualified staff.
To be carried out by the person responsible:
After carrying out the work, ensure that there are no longer any persons in the installation.
Before restarting the installation, ensure that all factory-installed protective measures are
functioning correctly.
WARNING
Risk of injuries due to fan delay.
Only open the inspection doors only when the fans are switched off and stationary.
Observe the delay time of the fans. Observe a waiting time of 3 minutes, until the fan im
-
pellers are stationary, before opening the inspection doors.
Never brake the impellers of the fans by hand or using an object.
NOTE
The owner/operator of an air conditioning system is obliged to have the installation main-
tained regularly by qualified staff.
AL-KO THERM recommends that maintenance is carried out in accordance with German
VDI 6022 and VDMA 24186.
In addition, a hygiene inspection in compliance with VDI 6022 is required every 3 years.
The actual maintenance intervals are to be adjusted to the corresponding operating conditions.
If a maintenance contract is concluded, AL-KO THERM will carry out this work.
ATTENTION
Only use original consumables and spare parts. This is the only way to ensure safe operation.
Otherwise the warranty will be voided.
A spare parts list can be found as part of the unit documentation.
Customer Service
Phone: +49 8225 39 - 2574
E-mail: [email protected]
Web: www.al-ko.com
8.2
Fuses and terminal assignment
The fuses implemented are slow-blow circuit breakers.
The fuse and terminal assignments can be found in the supplied circuit diagram.
