Release Notes
HUB4000 Q/AKG System Architect plug release 3.9 – December 2012
The newest software release 3.9 for the HUB4000 Q includes an improved
firmware for the HUB4000 Q and an improved and enhanced plug-in for
System Architect 3.4.
No hardware changes have been made to the HUB4000 Q. This release is just
a software update, which means that all HUB4000 Qs can be used to run
software version 3.9 after a firmware update.
It is recommended to install the latest System Architect version and to update
the HUB4000 Q’s firmware to version 3.9. Please download the latest version
of
System Architect
TM
control software from
http://hiqnet.harmanpro.com/downloads.php
The latest System Architect version 3.4 or higher includes all software modules
for the HUB4000 Q. Before System Architect and the new HUB4000 Q plug-in
can be used, the HUB4000 Q firmware must be updated with the System
Architect firmware updater to the latest version of firmware which is already
included in System Architect 3.4.
Please refer to the System Architect help file how to update the firmware of the
HUB4000 Q!
It is recommended to use DSR700 with firmware higher than 15.17.15 and
SR4000 with firmware version 1.22 to have access to all features of the AKG
HiQnet plug-in 3.6.
See the unsupported features and known issues list below for further
information.
Please contact technical support how to update SR4000s:
December 2012
Page 26
HUB4000 Q – Quickstart Guide
