- This opens the
Local Area Connection Status
panel. Here you can see the
status of your network.
- Click at the
Properties
Button
- Double Click at the
Internet Protocol 4 (TCP/IPv4)
entry
- At the
Internet Protocol Version 4 (TCP/IPv4) Properties
panel you can set the
PCs network settings for this network.
If you choose ‘
Obtain an IP address automatically
’ the PC tries to get an IP
address with DHCP or AutoIP.
You can also define a static IP address and subnet at ‘
Use the following IP
address
’. See
FAQ 6-2
for more information about setting an IP address
FAQ 15: System Architect crashes when starting 1 Click Setup!
System Architect 1 Click Setup only works with 32 bit versions of Windows operating
systems. With 64 bit versions of Windows operating system System Architect is
crashing when launching 1 Click Setup. This issues is known and AKG is working on a
solution to fix it.
FAQ 16: Environment Scan doesn‘t work, or is very slow!
Normally your PC doesn‘t fullfil the minumum requirements if environment scan
doesn‘t work. Please check your PCs specification and the minumum requirements at
FAQ 13+2-4
.
December 2012
Page 24
HUB4000 Q – Quickstart Guide
