Akai HV 10, Руководство оператора

Страница: 25 / 43

17
When the Base channel in MIDI SYSTEM is set to channel 1, each harmony part can be controlled by
setting the sequence data as follows.
(Example)
Track1 (2ch) > Harmony L2 (2ch)
Track2 (3ch) > Harmony L1 (3ch)
Track3 (4ch) > Harmony H1 (4ch)
Track4 (5ch) > Harmony H2 (5ch)
When the Base channel in MIDI SYSTEM is set to channel 15, each harmony part can be controlled
by setting the sequence data as follows.
(Example)
Track1 (16ch) > Harmony L2 (16ch)
Track2 (1ch) > Harmony L1 (1ch)
Track3 (2ch) > Harmony H1 (2ch)
Track4 (3ch) > Harmony H2 (3ch)
Note: Each channel receives the single note information only. No chord is received.
WAIT ALL
Unlike the MONO CHN. mode, the harmony is generated receiving the MIDI note information on a
single MIDI channel. It generates the harmony when it receives the same number of notes as the
number of harmony part set to ON (except for the original voice) at BUDDIES parameter (refer to
VOICE parameters). As this allows the player to decide which part to play which harmony, the
sophisticated harmonies can be assigned in real time, but it always requires the entry of designated
number of MIDI note chords.
Note: The MIDI channels of the DecaBuddy and the external MIDI device that transmits the MIDI
information must be set the same (refer to MIDI SYSTEM in GLOBAL parameter).
Here, we use the PROGRAM A in BANK47 to explain editing the WAIT ALL Program.
Select the PROGRAM A in BANK47 ([47A Wait 4] displayed on screen) using the BANK/DATA control
and PROGRAM A button.
1. Press the EDIT button. Confirm that the lower line of the screen shows [WAIT ALL]. (If not, press
the < button to move the cursor down to the lower line of the screen and then select [WAIT ALL]
using the BANK/DATA control. Press the EDIT button to move the cursor up to the upper line of the
screen.)
2. Select the [BUDDIES] parameter using the BANK/DATA control. The lower line of the screen
shows [ , , , , ].
3. Press the < button to move the cursor down to the lower line of the screen.
4. Change the parameter referring to the following examples and sing into the microphone playing
the external MIDI keyboard.
✽
The ORIGINAL VOICE: ON/OFF setting in BUDDIES parameter is irrelevant to the harmony
settings.
EDIT Mode