Akai AK4919UHDS, Инструкция по эксплуатации

Страница: 35 / 64

35
Recording
One-Touch Recording (in DTV mode only)
First, insert your USB memory device into the USB port.
When Watching a Program in DTV Mode:
• Press the RECORD button on the remote control to
start recording directly.
Press it again to display information about the current
recording.
• Press the STOP button to display a dialogue box:
select Yes to stop recording, select No to dismiss the
dialogue box.
• When a program is being recorded in the background (while the TV is in standby
mode), the LED light will flash blue and red.
NOTE: The TV can record only one TV programme at a time, and you must be watching
the same channel that is currently being recorded. If you wish to change channels, then
you will be prompted to stop recording the programme.
Scheduled Recording (in DTV mode only):
• Press the GUIDE button to bring up the TV Guide.
• Select the program you wish to record and press the RECORD button.
• Press the button to select the Mode and use the / buttons to edit the mode
of recording. Available options are: Once, Daily and Weekly.
• You can further adjust the start and end dates and times by pressing OK on the
highlighted date/time, and then pressing the / buttons to change the value.
• After you have finished adjusting settings to desired options, highlight the OK
button on the screen and press the
OK button on the remote to confirm and save
the scheduled recording. A ‘Success’ message will appear on-screen. Press the
RETURN button to exit the screen.
NOTE:
You can set up several schedule programmes to record. Different schedules
should not overlap and there must be at least a 1 minute time gap to set up between
two schedules.
IMPORTANT!
Before you can record with this TV (including time-shift recording), you must insert a
FAT32 formatted USB storage device into the USB port.