Check the signal strength level at the installation location
If the signal level is one division, we cannot guarantee stable operation of the
security system. Take possible measures to improve the quality of the signal! As a
minimum, move the device — even 20 cm shift can signi�cantly improve the quality
of reception.
If, after moving, the device still has a low or unstable signal strength, use a
.
The Transmitter should be encased inside the wired detector case. The Module
requires a space with the following minimum dimensions: 110 × 41 × 24 mm. If the
installation of the Transmitter within the detector case is impossible, then any
available radiotransparent case could be used.
radio
signal range extender ReX
1.
Connect the Transmitter to the detector through the NC/NO contacts (choose
the relevant setting in the application) and COM.
The maximum cable length for connecting the sensor is 150 m (24 AWG twisted pair).
The value may vary when using different type of cable.
The function of the Transmitter’s terminals