For the detection and interfacing to occur, the device should be located within the
coverage area of the wireless network of the hub (at a single protected object).
Request for connection to the hub is transmitted for a short time at the time of
switching on the device.
If the connection to the Ajax hub failed, the Transmitter will switch off after 6
seconds. You may repeat the connection attempt then.
The Transmitter connected to the hub will appear in the list of devices of the hub in
the application. Update of device statuses in the list depends on the device inquiry
time set in the hub settings, with the default value – 36 seconds.
States
4.
Switch on the device (by pressing on/off button for 3 seconds).
1.
Devices
2.
Transmitter