detector is powered only in the “Always active” or the “Turned off when the hub
disarmed” mode, regardless of the security system status.
Indication
Event
Indication
The Module is switched on and registered
The LED lights up when the ON button is brie�y
pressed.
Registration failed
LED blinks for 4 seconds with an interval of 1
second, then blinks 3 times rapidly (and
automatically switches OFF).
The Module is deleted from the list of hub devices
LED blinks for 1 minute with an interval of 1
second, then blinks 3 times rapidly (and
automatically switches OFF).
The Module has received alarm/tamper signal
The LED lights up for 1 second.
Batteries are discharged
Smoothly lights up and goes out when the
detector or tamper is activated.
Performance testing
The Ajax security system allows conducting tests for checking the functionality of
connected devices.
The tests do not start straight away but within a period of 36 seconds when using
the standard settings. The test time start depends on the settings of the detector
scanning period (the paragraph on “
Jeweller
” settings in hub settings).
Jeweller Signal Strength Test