1
13
AJA XenaHS User Manual — Using Xena With Application Software
Xena Control Panel Windows Media Settings, Video Processing Settings
Enable
—when checked, this turns video processing on. If unchecked, video is passed
without any mix/split/key etc.
Vid Proc Mode
—selecting one of these buttons chooses a function (Mix video, split
video, or key) to be performed on the sources selected in the pulldowns to the right
of the buttons.
Mix
—When video processing is enabled and Mix is chosen, the Mix Coefficient
slider is active. This slider mixes from Foreground Video to Background Video.
Split
—When video processing is enabled and Split is chosen, both sliders are
enabled and they perform either wipe or slit operations. See Split Mode discussed
later.
Key
—When video processing is enabled and Key is chosen, the Foreground key will
cut a hole in the Background Video and insert the Foreground Video.
Split Mode
—selects a transition to be applied, wipe or split, that can be adjusted using
the slider controls at the right.
H Wipe
—In this mode, the Wipe Position and Wipe Softness sliders are active. The
Wipe Position slider, wipes from Channel 1 Video (leftmost position) to Channel 2
Video (rightmost position). The Wipe Softness slider goes from no softness to
softness covering a quarter of the raster.
V Wipe
—In this mode, the Wipe Position and Wipe Softness sliders are active. The
Wipe Position slider, wipes from Channel 1 Video (leftmost position) to Channel 2
Video (rightmost position). The Wipe Softness slider goes from no softness to
softness covering a quarter of the raster.
