background image

Io 4K Plus Capture, Display, Convert v14.0r2 28 www.aja.com

 

NOTE:  The 4K Transport setting on the SDI Out screen also affects the Io 4K Plus HDMI 

output signal, even if the SDI inputs are not being used. A 12G/6G 1-Wire or 

SMPTE 2Si setting is required for UltraHD/4K HDMI output. Other 4K Transport 

settings will down-convert HDMI output to HD or 2K.  

HDMI Output

Select

For UltraHD/4K formats, this pulldown lets you choose:

•  Primary – Full 4K or UltraHD format
•  4K Quarter - Down-converts 4K to 2K, and UltraHD to HD.

Audio Ch

This pulldown allows you to select the number of embedded audio channels for 

the HDMI output. Two or eight channels can be chosen. Select from:

•  2 Ch 1-2 through 15-16
•  8 Ch 1-8
•  8 Ch 9-16

Audio Ch 3/4 Swap

This checkbox controls HDMI input audio channel placement. Some multi-

channel audio decoder systems route the low frequency effects audio to channel 

4, and some to channel 3. If you want to monitor or pass audio though to another 

device, this control can be used to align these two channels correctly.

•  Checked - (default) HDMI audio input channel 3 is moved to channel 4's 

location, and input channel 4 is moved to channel 3's location. 

•  Unchecked - HDMI audio input retains the original 3 and 4 channel locations.

Protocol

This pulldown allows you to choose:

•  Auto Detect - Selects HDMI or DVI depending on signal.
•  HDMI - Selects HDMI.
•  DVI - Selects DVI. Use when outputting to a DVI monitor using an HDMI to DVI 

adapter.

RGB Range

This pulldown lets you configure video output range. Choose from:

•  SMPTE 
•  Full

Color Space

Sets the color space bit depth. Select from:

•  RGBA 8bit 
•  RGB 10bit

HDMI Input 

The detected HDMI input video format is displayed and you’re given a chance to 

configure the RGB range of the HDMI input.

Содержание Io 4K Plus
































































Отзывы: