AJ 1000M, Руководство по эксплуатации и список запасных частей, Страница: 21 / 83

∎ Underwater usage of the breaker without the underwater kit and air
compressor will cause serious damage to the hydraulic breaker.
5. Underwater Operation(Option)
∎ The range of application : 500M ~ 1500M and 180F ~ 550F
∎ Underwater operation of the breaker is possible to pour air into the striking area between the piston
and the chisel.
(1) Set up the underwater operating system
∎ Check where the air inlet of the breaker is before you equip the underwater operation system.
∎ Refer to the above the picture, and set up the underwater operation system.
∎ Assemble the underwater operation system into the breaker, and set an air hose on the
equipment.
∎ Be careful that the hose should not be curved or bent.
∎ Set and fix the pressure adjustor where it can be seen very clearly from the driver seat.
∎ Remind that the hose connects to air compressor should not be interfered.
∎ The location of the hose coupling should be on the upper part of the arm of the machine and set
and fix the metal part of the hose coupling on the equipment.
∎ When you set up the hose that connects to the air compressor, you can use a long bar to take
down the hose to the ground from a distance from the machine. It can help preventing the
hose from the damage which from the machine goes around.
∎ Remove the air vent from the back head of the breaker and connect the adapter to the air
hose.
∎ Connect the pressure switch in series between the solenoid valve for the breaker operation and
the breaker operation switch.