Aiwa XR-EM70, Руководство по обслуживанию

Страница: 30 / 52

– 30 –
Pin No.
38 SLOF I Sled servo off control input.
39 CV–
I CLV error signal input from the DSP.
40 CV+
41 RFSM O RF output.
42 RFS– O Sets the RF gain and the EFM signal's 3T compensation constant together with the RFSM pin.
43 SLC O
The SLC (slice level control) signal is output to control the DSP's data slice level of the RF
waveform.
44 SLI I Input to control the DSP's data slice level.
45 D-GND – Ground of digital signals.
46 FSC O Output for the focus search smoothing capacitor.
47 TBC I The TBC (tracking balance control) signal sets the EF balance variation range.
48 NC – Not connected.
49 DEF O Disc defect detection output.
50 CLK I Reference clock input. 4.23MHz is input from the DSP.
51 CL I Microprocessor command clock input.
52 DAT I Microprocessor command data input.
53 CE I Microprocessor chip enable input.
54 DRF O DRF (detect RF) is an output to detect the RF level.
55 FSS I
The FSS (focus search select) signal switches the focus search modes (+/-search / +search with
respect to the reference voltage). (Not used)
56 VCC2 – VCC of servo and digital circuits.
57 REFI – For the connection of bypass capacitor for the reference voltage.
58 VR O Reference voltage output.
59 LF2 – Sets the time constant for disc defect detection.
60 PH1 – For the connection of a capacitor to hold the RF signal peak.
61 BH1 – For the connection of a capacitor to hold the RF signal bottom.
62 LDD O APC circuit output.
63 LDS I APC circuit input.
64 VCC1 – VCC of RF signal circuits.
I/O Description Pin Name
All manuals and user guides at all-guides.com