12
Subject to change without notice | 83059200dUK – Translation of the original operating manual | ait-deutschland GmbH
7 Installing the control panel
There are 4 openings in the top area of the switch box
panel of the unit for fastening the control panel.
Example for HV 12-3
1. There are 4 hooks at the rear of the control panel,
which are used to hook the control panel onto the
switchgear compartment panel:
2. Press the hooked in control panel downwards
until it latches into position.
3. Plug control cable into the bottom of the control
panel.
1 Room control panel RBE RS 485 (accessory)
connection
2 Network cable connection
3 LIN-bus cable connection to the controller
board
4 Modbus cable to Modbus distributor
connection
