4
5
3
1
2
INSTALLING THE POWER SUPPLY
The Pixie™ power supply should be mounted on a wall using the fi ttings supplied. We recommend
using the supplied mounting template provided to affi
x the wall plugs and mounting screws. The
power supply should then slip into the keyhole slots on the rear of the unit.
It is preferable that the power supply is mounted in a location where it is protected from
accidental water spray and inclement weather. It is strongly recommended that the unit is also
protected and screened from the harsh sun, but in such a way that air fl ows freely through the
structure and does not impede the natural airfl ow through the power supply.
You should also ensure that the power supply is not used as a shelf to store or pack objects,
as this can also impede the air fl ow, causing overheating and/or damage to the unit that is
not covered by warranty. Mount the power supply so that you can see and reach the various
controls and so that the cell lead has a comfortable margin to reach the cell terminal posts.
Our recommendation is that the power supply is mounted slightly higher and to one side of the
fi lter plant to allow easy access (refer to Fig. 3).
1.
Pump
2.
Filter
3.
Water heater
4.
Power supply for
chlorine generator
5.
Chlorine generator cell
Fig. 3
