CIRCUIT BREAKER
The circuit breaker is designed to trip out in the event of a power surge or power overload.
When tripped the centre button will pop out shutting down the unit to prevent damage. To
reset, depress circuit breaker until a click is heard.
ON/OFF SWITCH – ERP10H MODEL ONLY
The on/off switch is located on the front panel and has been incorporated to allow you to
switch off the chlorinator function should you so desire. Please note that this switch will only
shut down the chlorinator operation. It will not aff ect the normal fi lter functions.
PUMP OUTPUT SOCKET – RP10TH and RP10QTH MODELS ONLY
A 240-volt pump output power socket is supplied and located on the right-hand underside of
the power supply. Your pool pump power supply lead should be plugged into this socket so
that when the time clock switches at your designated times both the saltwater chlorinator and
pool pump will activate in unison.
Do not attempt to operate the chlorinator power supply with the pool pump lead disconnected
as this will lead to a gas build-up inside the cell housing causing it to overheat resulting in
damage to your chlorinator equipment that is not covered by warranty. In extreme cases gas
build-up may also cause the cell housing to rupture and explode, as it is not built to withstand
this type of pressure, possibly resulting in personal injury.
The pump socket is designed to operate a single pool pump of maximum 8A only. Do not
attempt to operate any equipment other than your pool pump from this socket as damage
might occur to the power supply unit that is not covered under warranty.
TIME CLOCK OPERATIONS (RP10TH AND RP10QTH MODELS ONLY)
(FIG. 1, ITEM 7)
The standard timer (Grässlin model FM/1 Stuz) is designed to switch your equipment on and off
at the nominated times.
Your timer has a standard clock face and hands set in the centre section, whilst the outer grey
bezel shows the hours in military style (24 hour) time. To set the clock to present time, place
your fi nger on the outer grey bezel and slowly turn it clockwise to the desired time.
SPECIAL NOTE ON TIMERS – RP10QTH Quartz Battery Backup model
If you require your Pixie™ saltwater chlorinator to be connected to a cheaper off -peak
tariff , we recommend the use of an appropriate quartz time clock for that purpose.
The unit may also be hard wired in, however, in case of incorrect wiring or damage
caused by modifi cations warranty will be void.
The Pixie™ RP10QTH (with battery backup) is available lieu of the standard model to allow
time of day to be maintained when power supply is interrupted.
