12
FUNCTIONS COMMON TO ALL MODELS
Lock function (
):
this function prevents the hob from being switched on accidentally (childproof
safety device). To activate it, the
sensor must be pressed for about three seconds (the warning light
comes on). It is not possible to operate the heated areas when
is active. While the heaters are still
working, it is possible to switch off the heating areas in
. This function is deactivated by pressing the
sensor for two seconds, for all configurations.
RESIDUAL HEAT
Every plate has a device to indicate the presence of residual heat. After any plate has been switched off,
a flashing light may be shown on
the display. This signal indicates that the particular cooking area is
still very hot. It is possible to start cooking food when the light
is flashing, reactivating the heating
element required.
SWITCHING OFF THE HEATING ELEMENTS
When the plates are switched off, the operating power display indicates
0
.
The plate will be automatically deactivated 5 seconds after the display indicates 0. If the plates are hot,
the residual heat indicator will appear after they are switched off
.
SWITCHING OFF THE HOB
The hob is switched off by keeping the
symbol pressed for one second, even with the plates in
operation. All the plates will be deactivated and the hob will be switched off completely. If the plates are
hot, the residual heat indicator will appear a few seconds after the hob
is switched off.
If the heater is working in Low-temp Function, the levelassumed is 3.
USE
If the power level is not changed during a preset time,
the corresponding heater turns off automatically.
The maximum time a heater can stay on, depends on
the selected cooking level.
AUTOMATIC SAFETY OFF
Power
level
Max. time on
(hours)
1
10
2
5
3
5
4
4
5
3
6
2
7
2
8
2
9
1
