ARRANGEMENT OF THE HEATING ELEMENTS
CENTRAL REAR
CENTRAL FRONT
6
DESCRIPTION OF THE HOT PLATES
SWITCH ON/OFF A HEATER ZONE
To switch ON a heater Touch any heater´s zone during 400 msec. Long beep will be heard and "0" value
will appear in target zone digit, indicating power level.
● If any cooking stage is in position
0
, this display will switch OFF automatically after 10 seconds and
the zone OFF sequence will sound.
● If there is residual heat indication in the display which is ON but in
0
power, “
0
” will appear changing
over.
● If lock function is active you cannot switch ON a zone.
To switch OFF a heater Touch any heater´s zone during 1, 2 sec. 3 short beeps will be heard and nothing
or "
H
" value will appear in target zone digit if residual heat exists. Zone will be OFF.
● If any cooking stage is in position
0
, this display will switch OFF automatically after 10 seconds and the
zone OFF sequence will sound.
● If there is residual heat indication in the display which is OFF, "
H
" will be displayed.
● Even lock function is active you can switch OFF a zone.
● If only one heater is active and this one is switched off, 4 short beep will be heard indicating all cook top
is OFF.
1) INSTRUCTIONS FOR THE USER
Connection to the mains
When cook-top will be connected to power supply, a long beep will be hear. All leds and displays in the
Touch Control will be turned ON during 4 seconds. After an auto adjust period, cook-top will show
software version during 10 seconds or while no touch any key.
Note:
In order to avoid any undesired disturbance on the touch control,
place correct pots inside the marked place of the glass ceramic
surface (see fig. 1 to pag. 15).
MODEL: PT1356