8
DESCRIPTION OF THE HOT PLATES
If the power level is not changed during a preset time,
the corresponding heater turns off automatically.
The maximum time a heater can stay on, depends on
the selected cooking level.
Power
level
Max. time on
(hours)
1
10
2
5
3
5
4
4
5
3
6
2
7
2
8
2
9
1
P
1
Ntc
OPERATION
ELC touch control has a component which read every time the temperature into touch control cavity. At
this wave, ELC is always protected against over temperature matters.
This temperature target, is recorded in
E2prom
. When temperature reaches this value, all heaters power
level go down automatically their real power level in 2 points.
For example:
►
Step 1.
- Heater 1 and 2 are working to power level 9, heater 3 to power level 8 and heater
4 to power level 7.
►
Step 2.
- In their respective displays we would follow seeing these power levels number.
►
Step 3.
- But really, the heaters would have a
Ton
cycle totally different. Heater 1 and 2
would be working with a real
Ton
cycle of power level 7, heater 3 with real
Ton
cycle of power level 6 and
heater 4 with real power level 5.
If temperature reaches
E2prom
recorded temp + 5 ºC, other 2 point is rest to these last values but real
power levels continue showing in displays.
If then temperature reaches
E2prom
recorded temp + 10 ºC, all cook-top will switched off and ‘
Fc
’
message will appear on displays.
SILENCE MODE
Press key sequence:
+
and
–
combined and 1 long beep and 1 short beep will be heard.
Before 2 seconds passed, touch – key.
When
symbol appears, it means that sound is OFF. Only errors, alarms an heater ON and OFF will be
heard.
Touching
+
key, sounds will be ON and symbol
will appear.
Settings validation will produce after a 5 seconds timeout.
A cook-top never will work with Ton cycle fewer than 4 power level.
AUTOMATIC SAFETY OFF
NOTE!
