Indoor unit cassette type
1. The location must allow easy servicing and provide good air circulation as shown in fig 4.
2. The unit may be suspended from a wall by a bracket (Optional) or located in a free standing posi-
tion on the floor (preferably slightly elevated).
3. If the unit is suspended, ensure that the bracket is firmly connected and the wall is strong enough
to withstand vibrations.
4. Unit location should not disturb neighbors with noise or exhaust air stream.
5. Place the mounting pads under the unit legs.
6. Refer to figure 4 for allowed installation distances.
When the unit is installed on a wall, install the drain connector hose and drain plug as shown in
fig1 and fig2.
1. Bottom of outdoor unit
2. Drain connector
Fig.1
Drain installation
Example
Fig.2
7
Fi
g 2
Fi
g 1
1
2
Outdoo
r unit
Содержание KCD
