21
Downwards
Backwards
*According to figure on the right, choose a certain direction to
lead out drain pipe; drain holes are available on both right and
left sides; practical conditions shall be considered. After deciding
upon the directions to lead out pipelines, wires and drain pipes,
drill wall holes according to required drilling processes.
*Install wall mount rack according to figure below.
In case of model
12-24
, fix drain pipes to drain holes on left and right sides (as shown in figure 4
and figure 5).
Install as follows (see figure below):
Plug drain pipe in water pan in the first place, as shown by figure, then, bind the two tight together
and tie up junction area with heat insulant.
Water Pan
Water Pan
Drain Pipe
Drain Pipe
Bond
Heat Insulant
*Installing Drain Pipe
Installation Procedures
3.Floor Type Installation
*Fix four rubber feet to the bottom of the unit with 4X16 bolts
and
12 spacers (applicable to floor type units only).
Right Side
Drain Hole
Left Side
Drain Hole
Figure 4 Model FAV012, FAV024
Ceiling Mount Rack
Edge
35mm
*
Wall Hole 70mm
655mm
990mm
500mm
245mm
65mm
125mm
100mm
65mm
530mm
473mm
Model FAV012, FAV024
