Airwell AWWR-WDF009-C11, Руководство по обслуживанию

Страница: 18 / 35

INSTALLATIOIN
Window WDF 16 Version - 0
8.2 Check off installation.
¾
The setting conditions must be checked prior to initial starting. The under mentioned items are
especially important checking points when the installation is finished.
¾
Grounding wire (yellow/Green) is provided in the power cord. The wire must be grounded.
¾
Ensure that the unit is connected to a suitably rated and dedicated circuit.
¾
To avoid vibration or noise, make sure the air conditioner is installed securely.
¾
Avoid placing furniture of draperies in front of the air inlet and outlet.
8.3 How to drain.
To get the maximum cooling efficiency, the air conditioner is designed to splash the
condensation water on the condenser coil.
If the splashing sound annoys you, you can provide an outside drain by using the following
procedure, which may however cause a small loss of performance.
1. Slide out the chassis from the cabinet.
2. Remove the rubber plug from the body base plate.
3. Install the drain pan to the corner of the cabinet with 2 screws.
4. Connect the drain hose to the outlet on the drain pan bottom.
5. Slide the chassis into its original place in the cabinet.