Airwell AWSI-DBV018-N11, Руководство по эксплуатации и установке

Страница: 14 / 37

12
Operation instruction
AUTO, COOL , HEAT and DRY Operation
(5) Unit stop
Press ON/OFF button, the unit stops.
(3) Temperature setting
Press TEMP button.
Set the proper temperature.
Every time the button is pressed, the setting temperature
increases by 1 C; if the button is kept pressed, the
setting temperature will increase quickly.
Every time the button is pressed, the setting temperature
decreases by 1 C, if the button is kept pressed, the
setting temperature will decrease quickly.
Press ON/OFF button, the unit starts.
Previous operation status appears on LCD (except for
TIMER,SLEEP and SWING setting)
(1) Unit start
In FAN mode, the temperature setting is not displayed
on LCD.
In DRY mode, when room temperature becomes
2 C higher than temperature setting, unit will run
intermittently at LOW speed regardless of FAN setting.
When room temperature is lower than temperature
setting, unit will only run FAN operation.
In HEAT mode, warm air will blow out after a short
period of time due to cold-draft prevention function.
NOTE:
(4) Adjust fan speed
Press FAN button. Each press, the fan speed changes
as follows:
Code A
Air conditioner will run at the selected fan speed.
AUTO LOW MID HIGH
A
U
T
O
Ultra-low air flow
COOL operation starts
when room temp.is higher
than temp. setting.
On reaching temp.setting
+2 C, unit will run in mild
DRY mode.
Temp. s2 C
Temp.setting
Press MODE button. Each press, the operation mode
changes as follows:
Code A
Then select AUTO, COOL, DRY or HEAT as needed.
(2) Select operation mode
AUTO FAN HEAT COOL DRY
FRESH
HIGH/SO TIMER
SET
FILTER
HEALTH
RESET
LOCK
SLEEP
FAN
TEMP
ON
OFF
SWING
MODE
CLOCK
CODE
LIGHT
HEAT
3
5
1
3
4
2