Airwell AWSI-DBV018-N11, Руководство по эксплуатации и установке

Страница: 11 / 37

9
Operation instruction
1.Press "CLOCK" switch
Setting of power failure compensation function
When SW1-6 on PCB of wire controller is OFF, it will be in power failure compensation. If the
SW1-6 is ON, it has no compensation function.
When the power is on after blackout, the unit will return to the former state if compensation
function is set. Otherwise, it will stop. When restarting the unit, press "ON/OFF" switch on
wired controller.
3.Press
“
SET
”
switch. The setting is
achieved.
"CLOCK" flickers, and the time displayed is
the real time.
If not in timing, the screen displays the real time.
If in timing, the screen displays the timing time.
If you want to know the real time, go to the first step.
Note
2.Press TIME " " and TIME " " to
regulate the time.
The time increases a minute each time you
press TIME "
" switch.
The time decreases a minute each time you
press TIME "
" switch.
1 2 3
HIGH
ROOM TEMP.
HEAT
FAN
OPERATION
MODE
CLOCK UP
MODE FAN SWING
HEALTH
CLOCK
TIMER
CHECK FILTER
RESET
ON/OFF
SET RECOVERY
TEMP
TIME
Present time setting
The timing is based on the real time. Thus, the real time should be regulated in advance.
The clock regulation steps are as follows: