Airwell AWSI-DBV018-N11, Руководство по эксплуатации и установке

Страница: 17 / 37

15
Operation instruction
Timer ON/OFF Function
Set clock correctly before starting TIMER operation.
(1) Unit start
After unit start, select your desired operation mode
(operation mode will be displayed on LCD).
(5) Cancel TIMER mode
Just press TIMER button several times until TIMER
mode disappears.
(4) Confirm setting
After setting correct time, press SET button to confirm
time. Now
or stop flashing.
Time displayed: unit starts or stops at X hour X min
(TIMER ON or TIMER OFF)
ON OFF
(3) TIMER setting
Every time the button is pressed, the time increases
by 10 minutes.
Every time the button is pressed, the time decreases
by 10 minutes.
Press time adjustment buttons
If the button is kept pressed, the time will changes
quickly.
It can be adjusted within 24 hours at will.
Hints:
After replacing batteries or if a power failure occurs, TIMER setting must be reset.
Remote controller has memory function. When you use TIMER mode next time, just press SET
button after mode selection if timer setting is the same as the previous one.
(2) TIMER mode selection
Press TIMER button on the remote controller to change
TIMER mode. Every time the button is pressed, display
of TIMER mode changes as follows:
Then select TIMER mode as needed (TIMER ON or
TIMER OFF). Now
or will flash. ON OFF
ON OFF ON OFF
AM
12:00
AM
12:00
PM
12:00
PM
12:00
TIMER ON TIMER OFF TIMER ON-OFF
blank
HEAT
FRESH
HIGH/SO TIMER
SET
FILTER
HEALTH
RESET
LOCK
SLEEP
FAN
TEMP
ON
OFF
SWING
MODE
CLOCK
CODE
LIGHT
1
3
4