Airwell AWAU-YGD009-H11, Руководство по обслуживанию

Страница: 33 / 54

CONTROL SYSTEM
If swing function has not been set after unit stating up:
Under heating mode, the upper and lower louver will rotate to position P4.
Under other modes, the upper and lower louver will rotate to position P7.
If swing function has been set after unit stating up:
Under heating mode, the up and down louver can be set to position: P2-P3-P4-P5-P6
Under other modes, the upper and lower louver can be set to position: P7-P6-P5-P4-P3
Auto swing setting
Under heating mode, the up and down louver will rotate from P2 to P6
Under other modes, the upper and lower louver will rotate from P7 to P3
Anti-moisture protection:
In Cooling, Auto Cooling and dry modes, the rotation range of louver will be from P6 to P4 if the
silent speed is selected.
11.8 Clean function
Clean function enables dring the indoor coil after Cool or Dry mode to avoid mould.
Press CLEAN button in Cool or Dry mode, and the will be shown on remote control.
Under clean function, the indoor fan will continue operation for 10 min at low speed after the unit is
turned OFF.
Clean function is defaulted as OFF after unit is Power ON.
Clean function is not available in Auto, Fan or Heat mode.
11.9 Sleep function
Pressing SLEEP button will enable the Sleep function. will be shown on remote control.
Sleep function in Cool and Dry mode:
The SPT will be adjusted according to following chart.
SM HGD-009/012 1-A.1 GB 11-7
Sleep function in Heat mode: