AirTight SpectraGuard Sensor, Руководство по установке

Страница: 34 / 39

Manual Configuration of SpectraGuard Sensor
SpectraGuard Sensor Installation Guide
24
Figure 19 Changing network settings using the setstaticip command
5.4.4 Step 4: Change Discovery Settings
Discovery Settings set up the discovery of the SpectraGuard Enterprise Server by the SpectraGuard
Sensor. These settings must be manually configured only if SpectraGuard Sensor is unable to locate
the SpectraGuard Enterprise Server.
Commands to change Discovery Settings
Type the following commands to change the Discovery Settings.
editconfig
This command allows the various SpectraGuard Sensor configuration parameters to be viewed and
changed. Pressing Enter leaves the previous values unchanged.
Type the commands (shown in bold) to change the Discovery Settings:
editconfig
Enter the modified fields or press Enter to leave unchanged
[Discovery Settings]
Auto Discovery = y
[y/n] : y
Server ID = 34
(0-65535) :
Stopping SpectraGuard Sensor...
Starting SpectraGuard Sensor...