background image

En-3

Name and Shape

Q’ty

Application

Drain hose insulation

1

Adhesive type 
3-15/16 × 8-11/16 in.
(100 × 220 mm)

VT wire

1

For 

fi

 xing the drain hose

L 11 in. (280 mm)

Insulation (Pipe)

1

Adhesive type 
6-5/16 × 4-5/16 in.
(160 × 110 mm)

Silencer pipe

1

Connect the silencer pipe to the small 
(liquid) pipe.

]1

2.4. Optional parts

Description

Model No.

Application

Auxiliary pipe

9374714025

For indoor side pipe joint
(For AB18, AB24)

External connect kit

UTY-XWZXZC

For output function
(Output terminal / CNB01)

UTY-XWZXZB

For control input function
(Apply voltage terminal / CNA01)

UTY-XWZXZD

For control input function
(Dry contact terminal / CNA02)

UTY-XWZXZ7

For forced thermostat off function
(Apply voltage terminal / CNA03)

UTY-XWZXZE

For forced thermostat off function
(Dry contact terminal / CNA04)

1

2.5. About unit of the length

All Fujitsu General products are manufactured to metric units and tolerances. United  
States customary units are provided for reference only. In cases where exact dimensions 
and tolerances are required, always refer to metric units.

3. INSTALLATION WORK

Correct initial installation location is important because it is dif

fi

 cult to move unit after it is 

installed.

]1

3.1. Selecting an installation location

Decide the mounting position together with the customer as follows.

 

WARNING

Select installation locations that can properly support the weight of the indoor unit. 
Install the units securely so that they do not topple or fall.

 

CAUTION

Do not install the indoor unit in the following areas:
•  Area with high salt content, such as at the seaside. It will deteriorate metal parts, 

causing the parts to fail or the unit to leak water.

• Area 

fi

 lled with mineral oil or containing a large amount of splashed oil or steam, 

such as a kitchen. It will deteriorate plastic parts, causing the parts to fail or the unit 
to leak water. 

•  Area that generates substances that adversely affect the equipment, such as 

sulfuric gas, chlorine gas, acid, or alkali. It will cause the copper pipes and brazed 
joints to corrode, which can cause refrigerant leakage. 

•  Area that can cause combustible gas to leak, contains suspended carbon 

fi

 bers or 

fl

 ammable dust, or volatile in

fl

 ammables such as paint thinner or gasoline. If gas 

leaks and settles around the unit, it can cause a 

fi

 re.

•  Area where animals may urinate on the unit or ammonia may be generated.

Do not use the unit for special purposes, such as storing food, raising animals, 
growing plants, or preserving precision devices or art objects.
It can degrade the quality of the preserved or stored objects.

Do not install where there is the danger of combustible gas leakage.

Do not install the unit near a source of heat, steam, or 

fl

 ammable gas.

Install the unit where drainage does not cause any trouble.

 

CAUTION

Install the indoor unit, power supply cable, transmission cable, and remote controller 
cable at least 40 in. (1 m) away from a television or radio receivers. The purpose 
of this is to prevent TV reception interference or radio noise. (Even if they are 
installed more than 40 in. (1 m) apart, you could still receive noise under some signal 
conditions.)

If children under 10 years old may approach the unit, take preventive measures so 
that they cannot reach the unit.

Take precautions to prevent the unit from falling.

(1)  Install the indoor unit on a place having a sufficient strength so that it withstands 

against the weight of the indoor unit.

(2)  The inlet and outlet ports should not be obstructed; the air should be able to blow all 

over the room.

(3)  Leave the space required to service the air conditioner.
(4)  Install the unit where connection to the outdoor unit (or RB unit) is easy. 
(5)  Install the unit where the connection pipe can be easily installed. 
(6)  Install the unit where the drain pipe can be easily installed.
(7)  Install the unit where noise and vibrations are not ampli

fi

 ed. 

(8) Take servicing, etc., into consideration and leave the spaces. Also install the unit 

where the 

fi

 lter can be removed.

(9)  Do not install the unit where it will be exposed to direct sunlight.

]1

3.2. Installation dimension

Floor console

12 (300) 

or more

Left

Right

Unit: in. (mm)

12 (300) 

or more

Under ceiling

Ceiling

Ceiling

Indoor unit

Left

6 (150) 

or more

12 (300) 

or more

91 (2300) 

or more

Unit: in. (mm)

Floor

1 (20) 
or more

Right

9367701124-03_IM.indb   Sec1:3

9367701124-03_IM.indb   Sec1:3

2013-10-25   13:00:38

2013-10-25   13:00:38

Содержание ABUA12TLAV


















Отзывы: