Air4G Installation Guide
Page 67
Commercial in Confidence
UGD-D00229 Rev B
Figure 61 - Secure fiber-optic cable, place tie
2. Pull or slide the Millie-Tie onto the target. Note that the Millie Tie stretches to cushion the
installation.
Figure 62 – Secure fiber-optic cable, pull tie
3. Release the tension when snug, then cut and remove any excess strip. Always cut
through the square sections, not the wider cells.
Figure 63 – Secure fiber-optic cable, snug tie
Note:
Millie-Tie is efficient, and simply gets a little shorter after each use. The
remaining strip can be kept and reused.
Figure 64 – Secure fiber-optic cable, cut excess tie
4. Repeat these steps for each use.