Air4G Installation Guide
Page 32
Commercial in Confidence
UGD-D00229 Rev B
Optional Junction Box
Consisting of
2 x mounting bracket(s) for pole and wall
mounting
Bracket (x2)
2 x pole bands (stainless steel), as required,
supplied.
52 – 76 mm (3”)
2 x pole bands (stainless steel), as required,
supplied.
78 – 102 mm (4”)
Mounting screws – for mounting brackets to
junction box.
EJOT WN1412 – K50 x 12 – 4 supplied.
Wall mounting fasteners
Hole size = 7 mm
Sufficient cable wires ties, as required
(not supplied - customer responsibility)
Table 18 - External Duplexer (for some FDD variants only)
Parts
Images
Note:
the exact Duplexer might
appear different than shown.
1
External Duplexer
(for some FDD variants
only
) +
RF cables.
1
2 x pole bands (stainless steel)
(for 50-215 mm pole)
4.2.3 Verify Components
Air4G is shown below from the Ethernet termination and RF port end views respectively.