Airspan 605-0000-742, Установка оборудования

Страница: 53 / 83

Cabling the BSR
49
Cable: RJ-45-to-RJ-45 crossover
Connector: 8-pin RJ-45
Connector pinouts:
BSDU connecting cable connector pinouts
Crossover cable
8-
PIN
RJ 45
(BSDU'
S
10/100/1000 B
ASE
-T
PORT
)
8-
PIN
RJ 45
(BSDU'
S
10/100/1000 B
ASE
-T
PORT
)
Pin S
IGNAL
Pin S
IGNAL
1 Tx+ 1 Rx+
2 Tx- 2 Rx-
3 Rx+ 3 Tx+
6 Rx- 6 Tx-
Note: Pins not defined are not used
To chain BSDUs:
1. On the first BSDU, connect the RJ-45 connector, at one end of the crossover cable, to one
of the two 10/100/1000 Base-T ports (labeled 1 or 2) located on the BSDU's front panel.
2. On the second BSDU, connect the RJ-45 connector, at the other end of the crossover cable,
to one of the two BSDU's 10/100/1000 Base-T ports (labeled 1 or 2) located on the BSDU's
front panel.
Cable connections for BSDU daisy chaining with GPS
Note: When connecting BSDU's it does not matter which one of the two 10/100/1000
Base-T ports you use two connect two BSDUs
Connecting BSDU to PC for SNMP Management