manualshive.com logo in svg

Airspan 605-0000-742, Установка оборудования

Поделиться
Скачать
Airspan 605-0000-742 Скачать руководство пользователя страница 32

 

28 

MOUNTING THE BASE STATION RADIO (BSR) 

 

Mounting the MicroMAX 

The MicroMAX BSR can be pole-mounted or wall-mounted (optional). Pole mounting allows the BSR 
to be easily adjusted in the horizontal (azimuth) and vertical (elevation) planes for antenna 

alignment. 

For either mounting method, the MicroMAX provides mounting holes (displayed in the figure below), 

molded into its back panel for attaching the mounting brackets. 

Note:

 The BSR fully complies with IP Code - IPX6 for product enclosure protection.

 

 

 Warning:

 The BSR device is an outdoor radio unit, and therefore, must only be 

mounted outside.

 

 

 

Warning:

 Mount the MicroMAX in an orientation such that its ports (located on the 

bottom panel) faces downwards. This prevents rain water from settling on the ports, and 

thereby, avoiding damage to the unit such as corrosion and electrical short-circuiting. 

 

Note:

 The standard BSR kit, provides pole-mounting brackets. If you want to wall-mount 

the MicroMAX, contact your Airspan distributor for pricing and ordering of wall-mounting 

brackets.

  

Pole-Mounting the BSR 

Pole mounting allows the MicroMAX to be easily adjusted in the horizontal (azimuth) and vertical 

(elevation) planes for antenna alignment. The BSR is mounted using the mounting holes located on 

the BSR's back panel and the supplied pole-mounting brackets. The pole-mounting bracket is 
designed to support the BSR on a round pole of 45 mm in diameter. 

The figure below summarizes of the MicroMAX's pole-mounting procedure. 

Содержание 605-0000-742




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды