AirSep Centrox, Инструкция по эксплуатации

Страница: 33 / 72

Centrox Instruction Manual 33
AirSep Corporation
6.0 Operation
6.1 INITIAL START-UP
Before you attempt to install, operate, or repair the Centrox Oxygen
Concentrator, read and thoroughly understand this instruction
manual. Improper operation can result in severe bodily injury,
damage to the system, or poor performance.
Oxygen vigorously accelerates the burning of combustible
materials. In an oxygen-enriched atmosphere, many materials that
do not burn in normal air require only a slight spark or moderate
heat to set them aflame.
To avoid a fire or an explosion, keep gasoline, kerosene, oil,
grease, cotton fibers, paint, and any other combustible material
away from any part of the oxygen concentrator.
Do not smoke or use any open flame near the oxygen concentrator
or oxygen receiver.
Post “NO SMOKING OR OPEN FLAMES” signs in the area where
the components are located. AirSep STRONGLY recommends that
only individuals trained and experienced in the safe handling of
oxygen operate this system.
Before the Centrox can supply oxygen within purity specifications,
you must purge all air from the oxygen receiver(s).
Provide proper voltage to the oxygen concentrator to prevent
damage not covered under the AirSep Product Warranty.
When you turn the oxygen concentrator on for the first time, it can
take 20-30 minutes for the oxygen purity to reach the specification.