AirSep Centrox, Инструкция по эксплуатации

Страница: 22 / 72

22 Centrox Instruction Manual
AirSep Corporation
Feed Valves
The automatic feed air valves control the flow of the feed air as the air enters the
adsorbers (See Figure 4.4).
Waste Valves
The automatic waste valves control the flow of waste gas as it exits the adsorbers
(See Figure 4.4).
Exhaust Mufflers
The mufflers muffle the noise produced by the waste gas that vents through the
beds (See Figure 4.4).
Product Manifold
Product manifold facilitates the oxygen flow across adsorber beds (from top of the
adsorber beds) and to the product delivery line.
Equalization Valves
The equalization valves on the product manifold controls the flow of oxygen from
one bed to another during various steps of the oxygen generation process (See
Figure 4.4).
Check Valves Assembly
The check valve assembly supplies the product oxygen to the flow controller. See
Figure 4.4.
Product Pressure Gauge
Product pressure gauge mounted on the check valve assembly (See Figure 4.4)
displays the pressure of the product oxygen.
Flow Controller
The flow controller regulates the flow of oxygen (See Figure 4.4).
Product Valve
The valve prevents the supply of oxygen when the unit is in standby mode (Refer
to section 6 for the description of different types of mode). See Figure 4.4 for the
location of the product valve.
Coalescing Filter
The coalescing filter serves as bacteria filter and removes any bacteria present in
the oxygen supply (See Figure 4.4).