AIROCIDE APS-1000XL, Руководство по эксплуатации

Страница: 29 / 44

25
Attaching Airocide® System to Mounting Bracket
Once the mounting bracket is securely fastened to the wall or ceiling, the
Airocide® System is ready to be attached. Make certain the power cord is
unplugged during this procedure. Perform the following steps to attach the
unit to the mounting bracket:
1. Lift the Airocide® System Chassis, with the User Interface Panel to the
left, and place the slots at the top of the chassis over the mounting
bracket hooks.
2. Gently push the bottom of the unit chassis against the mounting bracket
until the bottom slots on the chassis pass through the mounting bracket
flanges.
3. With the chassis pressed up against the mounting bracket, slide the
chassis to the left to engage the locking slots located on the flanges on
the bottom of the mounting bracket.
4. Replace the screws that were removed in Step 5 of the Mounting
Bracket Removal process, beginning with the top screws. This step will
secure the chassis to the mounting bracket.
5. Carefully replace the outer cover by starting from the User Interface
Panel side, sliding the cover openings over the panel and the Air Outlet
Port. Then, rotate the cover down until it is flush with the unit chassis.
6. Replace the screws on the outer cover that were removed in Step 2 of
the Mounting Bracket Removal process. Be careful not to over-tighten
the screws.