- 25 -
Feed
Assy.
(Continued)
1. Apply Molykote PG-662 Grease to the side of a Bearing 6704.
2. Set the Bearing with its shielded surface on the Internal Gear Side, put a Feeding Gear Shaft A Unit
and secure with a C-Retaining Ring for Shaft 20.
ASSEMBLY PROCEDURE
If opened too much at the time of
assembling, the C-retaining ring
will be deformed, causing faulty
operation. Use snap ring pliers
with stopper.
The opening limit dimension
should be
φ
20.2.(Adjust at the
stopper position)
IMPORTANT NOTE
(
JJ21603
(C-RETAINING RING FOR SHAFT 20)
RB10338
(INTERNAL GEAR)
LL11181
(BEARING 6704)
Groove where the
C-retaining ring for
shaft should be fit
Shielded Surface
Bearing Open Surface
Beware of the bearing direction.
GREASE
MOLYKOTE PG-662
RB70222
(FEED GEAR SHAFT)
