AirMan PDS100S-6B4 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 65

AirMan PDS100S-6B4 Скачать руководство пользователя страница 7

1. Safety

1

-

3

Safety outfit

When handling the machine, do not wear;

loose clothes

clothes with unbuttoned sleeves

hanging tie or scarf

accessories such as dangling jewelry
Such outfit could be caught in the machine or dragged in the
rotating portion of the machine which could cause a serious
injury.

TR0084

Cautions of hose attachment and removal

Piping or the hose from this machine service valve should use

what can be borne enough for the discharge pressure of this

machine.

Please connect piping or a hose to this machine service valve

firmly before operation and during operation. If the connection

part is loosening, there is a possibility of piping or a hose

separating and getting seriously injured.

Please remove after closing a service valve and extracting

pressure remained, in case piping or a hose is removed. If

pressure remained should remain, a near thing blows away or

there is a possibility of a hose whipping, causing a

phenomenon and getting seriously injured.

In order to use it safely, please read the handling of the work

tools often used.

Transportation

When loading and unloading unit, be sure to use the lifting bail provided on the center of the unit top.

Never get under the unit which is suspended, it is very dangerous.

When unit is transferred or moved from a working site, be sure to place it on truck bed, and tie it down
firmly. Also be sure to put a set of chocks to fix its wheels firmly in position.

Never lift unit which is still in operation. It could cause critical damage to each component or lead to
serious accident.

Installation

The machine should be parked horizontally on a level place.

In case the machine has to be parked on a slope, place it
across grade so that the machine does not tend to roll
downhill.

Grade on a slope shall be within 15 degrees

Be sure to put one set of chocks 1 to the wheels.

A000054

TR0088

TR0088

TR0303A

Discount-Equipment.com

«
...
5
6
7
8
9
...
»

Содержание PDS100S-6B4


































































Отзывы:

Нет отзывов