AirMan PDS100S-6B4 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 65

AirMan PDS100S-6B4 Скачать руководство пользователя страница 5

1. Safety

1

-

1

This manual explains and illustrates general requirements for safety.

Read all safety requirements carefully and fully understand the contents before starting the machine.

For your better recognition, according to the degree of potential danger, safety messages are classified

into three hierarchical categories, namely,

,

, and

with a caution

symbol

−

attached to each message.

When one of these messages is shown, please take preventive measures and carry out

“

SAFETY

OPERATION AND PROPER MAINTENANCE OF THE UNIT

”

.

DANGER indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury. This signal word is to be limited to the
most extreme situations.

WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury. It may also be used to alert against
unsafe practices.

IMPORTANT indicates important caution messages for the performance or
durability of the unit.

Follow warnings mentioned in this manual. This manual does not describe all safety items. We,
therefore, advise you to pay special attention to all items (even though they may not be described
in the manual) for your safety.

Discount-Equipment.com

«
...
3
4
5
6
7
...
»

Содержание PDS100S-6B4


































































Отзывы:

Нет отзывов