AirLive WH-9000MESH Скачать руководство пользователя

Страница: 27 / 66

802.11b, 802.11g and 802.11b/g Mixed mode

There are 11 (13 for ETSI) channel numbers that

may be assigned. Because the 802.11b signal

bandwidth is 22MHz, there are 3 non-overlapping

channels for 802.11b at 2.4GHz ISM band. To

reduce the interference problem, you may be able to

establish up to 3 wireless networks at the same area.

If you need establish 3 wireless networks, you may

assign channel number 1 to the first wireless network.

Then the channel 6 will be better for second wireless

networks and channel 11 will be the third one.

802.11g Super

The 802.11g Super mode occupies larger frequency

bandwidth. To avoid interfere another wireless

network operation, it is fixed at channel 6.

802.11a and 802.11a Turbo

The frequency band of IEEE 802.11a will vary

according to individual country regulations. The FCC (U.S) has allocated three bands,

UNII1(5.15~5.25GHz), UNII2(5.25 ~ 5.35GHz) and UNII3(5.725~5.825GHz). Each band has 4

non-overlapping channels. For Pan-Europe, there are the 5.15GHz~5.35GHz, 5.425GHz ~ 5.725GHz.

At Taiwan, the 802.11a device use the 5.725GHz ~ 5.875GHz frequency band. Refer to Appendix A to

get more information.

6.1.5 TX Power Mode

The Tx Power Mode let you can set the radio

power as you wanted. It defaults to Auto,

giving the larger range of radio transmission

available under normal conditions. As an

option, the AP’s cover range can be limited

by setting the TX Power Mode to Fixed and

choosing from 1~5 for fixed power level (1

being the shortest distance.) Finally, if you

want to prevent any radio frequency

transmission, set Tx Pwr Mode to off.

AirLive WH-9000-MESH User’s Manual

Содержание WH-9000MESH



































































Результаты поиска

Содержание WH-9000MESH

Отзывы:

Похожие инструкции для WH-9000MESH

Бренды по названию

Популярные бренды

AirLive WH-9000MESH, Руководство пользователя

Результаты поиска

Содержание WH-9000MESH

Отзывы:

Похожие инструкции для WH-9000MESH

Бренды по названию

Популярные бренды